From: Icenowy Zheng <icenowy@aosc.io>
To: Simon Glass <sjg@chromium.org>, Kever Yang <kever.yang@rock-chips.com>,
Frank Wang <frank.wang@rock-chips.com>,
Jagan Teki <jagan@amarulasolutions.com> Cc: u-boot@lists.denx.de,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers
exit
Date: Tue, 6 Apr 2021 23:10:59 +0800
Message-Id: <20210406151059.1187379-1-icenowy@aosc.io>
The OHCI and EHCI controllers are both bound to the same PHY. They will
both do init and power_on operations when the controller is brought up
and both do power_off and exit when the controller is stopped. However,
the PHY uclass of U-Boot is not as sane as we thought -- they won't
maintain a status mark for PHYs, and thus the functions of the PHYs
could be called for multiple times. Calling init/power_on for multiple
times have no severe problems, however calling power_off/exit for
multiple times have a problem -- the first exit call will stop the PHY
clock, and power_off/exit calls after it still trying to write to PHY
registers. The write operation to PHY registers will fail because clock
is already stopped.
Adapt the count mechanism from phy-sun4i-usb to both init/exit and
power_on/power_off functions to phy-rockchip-inno-usb2 to fix this
problem. With this stopping USB controllers (manually or before booting
a kernel) will work.
Debian's flash-kernel expect the console variable to just contain the device,
because it will set the bootargs to "console=${console}". So revert adding
"console=" to the console parameter, but also adjust the shipped bootscripts
for exynos boards to cope with it.
Bug-Debian: https://bugs.debian.org/920116 Signed-off-by: Benjamin Drung <bdrung@debian.org>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0001-arm-config-fix-default-console-only-to-specify-the-d.patch
Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
failure to build caused by config_distro_bootcmd.h following the wrong
codepath...
Gbp-Pq: Name ensure-config-sandbox-for-make-env.patch
From: Icenowy Zheng <icenowy@aosc.io>
To: Simon Glass <sjg@chromium.org>, Kever Yang <kever.yang@rock-chips.com>,
Frank Wang <frank.wang@rock-chips.com>,
Jagan Teki <jagan@amarulasolutions.com> Cc: u-boot@lists.denx.de,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers
exit
Date: Tue, 6 Apr 2021 23:10:59 +0800
Message-Id: <20210406151059.1187379-1-icenowy@aosc.io>
The OHCI and EHCI controllers are both bound to the same PHY. They will
both do init and power_on operations when the controller is brought up
and both do power_off and exit when the controller is stopped. However,
the PHY uclass of U-Boot is not as sane as we thought -- they won't
maintain a status mark for PHYs, and thus the functions of the PHYs
could be called for multiple times. Calling init/power_on for multiple
times have no severe problems, however calling power_off/exit for
multiple times have a problem -- the first exit call will stop the PHY
clock, and power_off/exit calls after it still trying to write to PHY
registers. The write operation to PHY registers will fail because clock
is already stopped.
Adapt the count mechanism from phy-sun4i-usb to both init/exit and
power_on/power_off functions to phy-rockchip-inno-usb2 to fix this
problem. With this stopping USB controllers (manually or before booting
a kernel) will work.
The patch finishes migration of CONFIG_USE_PREBOOT and CONFIG_REBOOT
to Kconfig.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Gbp-Pq: Topic riscv64
Gbp-Pq: Name qemu-riscv64_smode-sifive-fu540-fix-extlinux-define-.patch
Debian's flash-kernel expect the console variable to just contain the device,
because it will set the bootargs to "console=${console}". So revert adding
"console=" to the console parameter, but also adjust the shipped bootscripts
for exynos boards to cope with it.
Bug-Debian: https://bugs.debian.org/920116 Signed-off-by: Benjamin Drung <bdrung@debian.org>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0001-arm-config-fix-default-console-only-to-specify-the-d.patch
Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
failure to build caused by config_distro_bootcmd.h following the wrong
codepath...
Gbp-Pq: Name ensure-config-sandbox-for-make-env.patch
From: Icenowy Zheng <icenowy@aosc.io>
To: Simon Glass <sjg@chromium.org>, Kever Yang <kever.yang@rock-chips.com>,
Frank Wang <frank.wang@rock-chips.com>,
Jagan Teki <jagan@amarulasolutions.com> Cc: u-boot@lists.denx.de,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers
exit
Date: Tue, 6 Apr 2021 23:10:59 +0800
Message-Id: <20210406151059.1187379-1-icenowy@aosc.io>
The OHCI and EHCI controllers are both bound to the same PHY. They will
both do init and power_on operations when the controller is brought up
and both do power_off and exit when the controller is stopped. However,
the PHY uclass of U-Boot is not as sane as we thought -- they won't
maintain a status mark for PHYs, and thus the functions of the PHYs
could be called for multiple times. Calling init/power_on for multiple
times have no severe problems, however calling power_off/exit for
multiple times have a problem -- the first exit call will stop the PHY
clock, and power_off/exit calls after it still trying to write to PHY
registers. The write operation to PHY registers will fail because clock
is already stopped.
Adapt the count mechanism from phy-sun4i-usb to both init/exit and
power_on/power_off functions to phy-rockchip-inno-usb2 to fix this
problem. With this stopping USB controllers (manually or before booting
a kernel) will work.
Set default fdtfile names for unleashed and unmatched boards, as used
in the upstream Linux kernel. This allows sysboot command to find and
load appropriate dtb for the matching kernel from universal stock
Ubuntu RISC-V rootfs images based on fdtdir setting in extlinux.conf.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
cc: Paul Walmsley <paul.walmsley@sifive.com>
cc: Palmer Dabbelt <palmer@dabbelt.com>
cc: Anup Patel <anup.patel@wdc.com>
cc: Atish Patra <atish.patra@wdc.com>
cc: Pragnesh Patel <pragnesh.patel@sifive.com>
cc: Green Wan <green.wan@sifive.com>
Gbp-Pq: Topic riscv64
Gbp-Pq: Name riscv-sifive-Set-default-fdtfile-names.patch
The patch finishes migration of CONFIG_USE_PREBOOT and CONFIG_REBOOT
to Kconfig.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Gbp-Pq: Topic riscv64
Gbp-Pq: Name qemu-riscv64_smode-sifive-fu540-fix-extlinux-define-.patch
Debian's flash-kernel expect the console variable to just contain the device,
because it will set the bootargs to "console=${console}". So revert adding
"console=" to the console parameter, but also adjust the shipped bootscripts
for exynos boards to cope with it.
Bug-Debian: https://bugs.debian.org/920116 Signed-off-by: Benjamin Drung <bdrung@debian.org>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0001-arm-config-fix-default-console-only-to-specify-the-d.patch
Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
failure to build caused by config_distro_bootcmd.h following the wrong
codepath...
Gbp-Pq: Name ensure-config-sandbox-for-make-env.patch
The patch finishes migration of CONFIG_USE_PREBOOT and CONFIG_REBOOT
to Kconfig.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Gbp-Pq: Topic riscv64
Gbp-Pq: Name qemu-riscv64_smode-sifive-fu540-fix-extlinux-define-.patch
Debian's flash-kernel expect the console variable to just contain the device,
because it will set the bootargs to "console=${console}". So revert adding
"console=" to the console parameter, but also adjust the shipped bootscripts
for exynos boards to cope with it.
Bug-Debian: https://bugs.debian.org/920116 Signed-off-by: Benjamin Drung <bdrung@debian.org>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0001-arm-config-fix-default-console-only-to-specify-the-d.patch
Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
failure to build caused by config_distro_bootcmd.h following the wrong
codepath...
Gbp-Pq: Name ensure-config-sandbox-for-make-env.patch
[ Arnaud Ferraris ]
* Add support for the pinetab platform (Closes: #982982)
* u-boot-install-sunxi: fix device tree model for PinePhone 1.1
(Closes: #984704)
[ Vagrant Cascadian ]
* debian/patches: Update PineTab patch use default bootdelay.
* debian/patches: Add Forwarded link to PineTab patch.
* debian/rules: Ensure debugging symbols are enabled.
* debian/rules: Pass argument to remove build path from debug symbols.
The patch finishes migration of CONFIG_USE_PREBOOT and CONFIG_REBOOT
to Kconfig.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Gbp-Pq: Topic riscv64
Gbp-Pq: Name qemu-riscv64_smode-sifive-fu540-fix-extlinux-define-.patch
Debian's flash-kernel expect the console variable to just contain the device,
because it will set the bootargs to "console=${console}". So revert adding
"console=" to the console parameter, but also adjust the shipped bootscripts
for exynos boards to cope with it.
Bug-Debian: https://bugs.debian.org/920116 Signed-off-by: Benjamin Drung <bdrung@debian.org>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0001-arm-config-fix-default-console-only-to-specify-the-d.patch
Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
failure to build caused by config_distro_bootcmd.h following the wrong
codepath...
Gbp-Pq: Name ensure-config-sandbox-for-make-env.patch
The patch finishes migration of CONFIG_USE_PREBOOT and CONFIG_REBOOT
to Kconfig.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Gbp-Pq: Topic riscv64
Gbp-Pq: Name qemu-riscv64_smode-sifive-fu540-fix-extlinux-define-.patch
Debian's flash-kernel expect the console variable to just contain the device,
because it will set the bootargs to "console=${console}". So revert adding
"console=" to the console parameter, but also adjust the shipped bootscripts
for exynos boards to cope with it.
Bug-Debian: https://bugs.debian.org/920116 Signed-off-by: Benjamin Drung <bdrung@debian.org>
Gbp-Pq: Topic exynos
Gbp-Pq: Name 0001-arm-config-fix-default-console-only-to-specify-the-d.patch
Ensure that CONFIG_SANDBOX is set when running "make env", avoiding a
failure to build caused by config_distro_bootcmd.h following the wrong
codepath...
Gbp-Pq: Name ensure-config-sandbox-for-make-env.patch
* debian/patches: Disable USE_PREBOOT on rockpro64 and pinebook-pro to
workaround boot failure triggered by USB initialization.
(Closes: #973323, #980434)
A64-Teres-I board is a laptop which comes with a builtin keyboard.
The keyboard+trackpad controller pauses for 2 seconds at a firmware
prompt before loading its HID interface.
U-Boot needs to wait equally long to reliably enable the keyboard.
Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Tom Rini <trini@konsulko.com>
Series-Cc: Jagan Teki <jagan@amarulasolutions.com>
Series-Cc: Lukasz Majewski <lukma@denx.de>
Series-Cc: Andre Przywara <andre.przywara@arm.com>
Gbp-Pq: Topic teres-i
Gbp-Pq: Name 0001-sun50i-a64-A64-Teres-I-board-detect-builtin-keyboard.patch
[PATCH] sunxi: Enable ethernet on newer Olimex OLinuXino-A20-Lime2-eMMC
Olimex OLinuXino LIME2 rev. H through L uses Micrel KSZ9031 PHY.
This enables the Micrel PHY for A20-OLinuXino-Lime2-eMMC_defconfig.
Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Gbp-Pq: Topic olinuxino-a20-lime2-emmc
Gbp-Pq: Name 0001-sunxi-Enable-ethernet-on-newer-Olimex-OLinuXino-A20-.patch
The patch finishes migration of CONFIG_USE_PREBOOT and CONFIG_REBOOT
to Kconfig.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Gbp-Pq: Topic riscv64
Gbp-Pq: Name qemu-riscv64_smode-sifive-fu540-fix-extlinux-define-.patch
projects / u-boot.git / log